PRODUCTS

STREET PAINT

205,00 615,00 

SKU: N/A Category:

Information

Coloured Street Paint
 
ISONEM STREET PAINT, is acrylic based flexible floor coating with strong adhesion, excellent water resistance and UV resistance. It is water-based and one-component, can be produced in desired color. It is water-based and one-component, can be produced in the desired color, is not affected by human and vehicle traffic, dries quickly and is easy to work. It is very suitable for walking paths, asphalt pavements, tennis courts and sports fields. It is used to obtain dust free and decorative surfaces on asphalt, concrete and cement surfaces in indoor and outdoor.
 

TECHNICAL SPECIFICATIONS

Density (25°C, g/mL): 1,40 ± 0,10
pH (25°C): 7.0 – 9.0
Viscosity (25°C, mPa.s): 9000 - 12000
Solid content (% Weight): 74 ± 2
Water transmission rate (kg/ m2. h0,5): < 0,1 CLASS W3
Adhesion strength by pull-off test (N/mm2): Crack bridging flexible systems with trafficking 1.5 N/mm²
Permeability to water vapour (m): 5 ≤  SD ≤ 50 CLASS II
Solvent: Water

Usage Areas

· Garages and light traffic exposed to parking areas

· Walking paths, garden floors,

· On concrete or asphalt roads, parking areas,

· Tennis, basketball, volleyball court grounds

· Game and entertainment areas

Application Type

Surface preparation: Substrate must be clean, dry. Surfaces should be cleaned with water wait for the dry. Surface must be washed with water and then application should be made before drying totally. Surface defects and voids should be repaired with ISONEM MS MORTAR with a thickness of 5 mm. All surfaces to be treated ISONEM Universal Primer (1: 7 diluted with water - 1 part primer, 7 part water) primed with the adhesion promoter and primer should dry at least 4 hours then ISONEM STREET PAINT can be applied.

Application method: ISONEM STREET PAINT is ready to use. It is mixed homogeneously with the help of a mixer in the bucket for 5 minutes and applied to the surface in two coats with a brush, roller or suitable spray gun, the waiting time between the coats is at least 4 hours. In the application with the sprayer, homogeneous distribution and penetration of the application on the surface are provided by brush or roller after application.

Consumption and Suggestions

CONSUMPTION: 1 kg/m² (two layers application)

PAINTABLE (COVERAGE) AREA: Min. 18 m²/bucket (two layers application)

COLOR: All requested can be produced in colors.

PACKAGING: 18 kg PP in buckets

SHELF LIFE: 24 months from date of production if stored in original, unopened, undamaged packages.

STORAGE CONDITION: Store tightly closed in a dry and cool place.

Application Photos

Additional information

KG

5KG, 10KG, 18KG

ru_RU